How to print a calibration ticket on a Neptune E4000 meter

Summary:

This article explains how to print a calibration ticket on a Neptune E4000 register (New Mobile Delivery). From the main menu (press Stop/Cancel until there), navigate with the Arrow > and Start/Enter buttons to Route → Reports → Calibration, confirm "Print Calib Report Report?" with Start/Enter, and the screen will show "--- Printing ---" when the ticket prints. After printing, press Stop/Cancel a few times to return to the main screen.

Question: 

How do I print a calibration ticket on a Neptune E4000 meter?

Environment: 

• New Mobile Delivery
• Neptune E4000

Answer: 

Please follow the steps below to print a calibration ticket on a Neptune E4000 register. 

1. First navigate to the main menu. You can press Stop/Cancel button several times to back all the way out to the main menu. 
   
    
2. On the main menu use the Arrow > button to select Route until it is flashing and press the Start/Enter button. 
   
    
    
3. Then use the Arrow > button to select Reports and press the Start/Enter button. 
   
    
    
4. Then use the Arrow > button to select Calibration and press the Start/Enter button. 
   
    
    
5. Press the Start/Enter button when you are prompted with "Print Calib Report Report?" to print the calibration ticket. 
   
    
    
6. You should see "--- Printing ---" on the screen and the calibration ticket should start printing within a few seconds. 
   
    
    
7. Here is an example of an E4000 calibration ticket. 
   
    
    
8. Press the Stop/Cancel button a few times to back out to the main screen.

Related Articles: 

• How to configure the printer type on a Neptune E4000 meter 
• How to get a Zebra printer to work with a Neptune E4000 meter 
• How to print a shift ticket from a Neptune E4000 meter 
• How to do a pump and print on a Neptune E4000 meter