Summary:
This article is a wiring/setup guide for integrating an Android tablet with a mechanical meter or for cylinder exchange using a Zebra ZQ520/ZQ521 thermal Bluetooth printer, listing required components (tablet, Zebra ZQ520/ZQ521 printer, USB A–C cable, printer dock, Lind power adapter and power cables to fused truck power). It includes a disclaimer that the guide is intended to assist Certified Truck Shops and may not show or supply every item needed, and it references additional Zebra printer configuration and hardware resources.
Question:
How do I wire an Android tablet with a Mechanical meter and Zebra ZQ520/ZQ521 Thermal Bluetooth Printer for Mobile Delivery?
How do I wire an Android tablet with a Zebra ZQ520/ZQ521 Thermal Bluetooth Printer for Cylinder Exchange?
Environment:
- New Mobile Delivery
- Cylinder Exchange
- Android Tablet
- Zebra ZQ520 Thermal Bluetooth Printer
- Zebra ZQ521 Thermal Bluetooth Printer
Answer:
Disclaimer:
The following guide was designed to assist Certified Truck Shops. This guide might not show all of the items and Cargas might not supply everything needed for a full installation. Please consult a Certified Truck Shop.
This setup is for both:
- Mobile Delivery Mechanical Meter and Zebra ZQ520/ZQ521 printer
- Cylinder Exchange with a Zebra ZQ520/ZQ521 printer
| A | Android Tablet | E | Zebra ZQ520/ZQ521 Thermal Bluetooth Printer |
| B | USB A to USB C Cable | F | Zebra ZQ520/ZQ521 Printer Dock |
| C | Lind Power Adapter | G | Zebra ZQ520/ZQ521 Printer Power Cable (to fused truck power) |
| D | Lind Power Adapter Power Cable (to fused truck power) |
Click on the pictures to enlarge them
Comments
Article is closed for comments.