To configure a Firefly adapter over Bluetooth, use the provided TeraTerm software (Windows only) along with two PDF guides: the Firefly user guide and a configuration guide detailing Bluetooth setup and required jumper settings. Note that for the LCR meter, all 4 DIP switches should be off, contrary to an incorrect note in the configuration PDF.
Question:
I have a new firefly adapter and it needs to be configured before it can work.
How do I configure a Firefly adapter over Bluetooth?
Environment:
- All Cargas Energy Versions
Answer:
Attached are two PDF guide documents and the TeraTerm software that you will need
- TeraTerm.exe - Is the GridConnect software used to configure the firefly over bluetooth (Windows devices only)
- Firefly_800314_c.pdf - Is the GridConnect user guide for the Firefly adapter
- Firefly Configuration-v031412.pdf - Is a guide outlining the steps for configuring a Firefly adapter over Bluetooth and the jumper setting that is required for each meter.
Note: The configuration PDF contains a message for the LCR that is incorrect. All 4 DIP switches should be Off, per the picture. The note is incorrect.
Comments
Article is closed for comments.