Article Summary:
This article shows you the Internal wiring and configuration for the dual LCR.iQ network setup.
*WARNING* Disconnect or turn off power to the LCR.iQ registers before opening them up
Environment:
- Cargas Energy
- New Mobile Delivery
- Liquid Controls LCR.iQ register
Meter 1:
C - LCR.iQ Network Cable - goes to Meter 2 for COM2 & COM 3 network connection
| J5 Block | Wire Color | J6 Block | Wire Color |
| 33 | Red | 37 | White |
| 34 | Black | 38 |
Green |
E - LCR.iQ 25pin serial cable - goes to Lap Pad Adapter for COM0 Printer & COM1 Bluetooth Adapter
| J14 Block | Wire Color | J14 Block | Wire Color |
| 88 | White | 91 | Violet |
| 89 | Green | 92 | Red |
| 90 | Grey |
Meter 2:
C - LCR.iQ Network Cable - goes to Meter 2 for COM2 & COM 3 network connection
| J5 Block | Wire Color | J6 Block | Wire Color |
| 33 | Red | 37 | White |
| 34 | Black | 38 |
Green |
Next Step:
Additional Info:
- Back to the beginning - Dual LCR-iQ Meter Configuration Guide - LCR.iQ Network
Comments
Article is closed for comments.