How to edit the Unit ID on an LCR.iQ register

Russ Casadonti

Edited: May 29, 2025 18:40

Article Summary:

This article shows you the how to configure the Unit ID on an LCR.iQ register.

Put the LCR.iQ in configuration mode. Here is an article that shows you how to.
How do I put the LCR iQ meter in configuration mode?
Use the OK & Arrow buttons to navigate to Setup Menu
Then Navigate to Register
On the Register (1/5) screen you can edit the Unit ID:

0 comments

Article is closed for comments.