Guide: How to flash a logo onto a TM-T88 printer

Environment:

• Cargas Mobile Delivery
• Epson TM-T88v printer
• Epson TM-T88vi printer
• Epson TM-T88vii printer

Summary:

The Epson TM-T88 printer is capable of printing out logos. Unfortunately, the logos need to be uploaded/flashed to all the TM-88 printers individually using a computer and the Epson Utility Software. 

*Note*  -  If you do not already you will also need to have your delivery ticket format customized with the print logo command which is a billable customization.

I have broken this down into articles to make it easier to follow. These articles will help you upload/flash a logo to an Epson TM-T88 printer.

Guide:

Step 1:     First you will need the Epson Utility Software for your specific model TM-T88 and setup the connection from your computer to the printer. Please follow this guide below. 

How to connect an Epson TM-T88 to a computer using USB

Step 2:     Next you can upload/flash your logo to a TM-T88 printer. There are two ways (New & Old Way) to upload a logo to a TM-T88 printer. Epson has depreciated the Old Way but many of you may still be using it. Please follow the correct article below for your situation. If you are unsure then please ask us and we can tell you which way you should use.

• If you have already uploaded/flashed logos to your TM-T88 printers and had logo customizations to your delivery ticket format with Old Mobile Delivery or prior to April 2024 then you are using the Old Way. Please follow this article below to upload logos the Old Way.
  
  (Old Way) - How to flash a logo onto a TM-T88 printer
  
  
  
• The New Way assign's designated Key Codes to each logo that you upload allowing you to upload multiple logos. All printers must have the same key code assignments. We need to know these Key Codes for the print logo commands.
  
  (New Way) - How to flash a logo onto a TM-T88 printer
  
  

Related Articles:

• Guide: Epson TM-T88 Thermal Printer