Summary:
I have broken this down into three articles to make it easier to follow. These articles will help you configure two LCR-iQ registers to work with New Mobile Delivery in a dual meter configuration using a Muliplexer Box or "Mux Box". This is a depreciated setup. These articles are only for pre-existing trucks that already setup with a Mux Box. The current recommended Dual Meter LCR.iQ setup is the LCR.iQ Network. If this is a new truck or new dual LCR.iQ setup then please follow the link below for the CR.iQ Network guide.
Assumptions / Additional Info
- This document assumes the user has an understanding and experience with outfitting trucks, installing/configuring registers, and electrical wiring.
Environment:
- Cargas Energy
- New Mobile Delivery
- Liquid Controls LCR.iQ register
Guide:
Typically follow these articles in order. These articles are all linked together so that you can progress through them step by step.
-
Dual LCR.iQ Mux Box - External Wiring Diagram
-
Dual LCR.iQ Mux Box - Internal Wiring Diagram
- Dual LCR.iQ Mux Box - I/O Configuration
Additional Info:
- Liquid Controls LCR iQ Printer Type Setup
- How to edit the Meter ID on an LCR.iQ register
- How to edit the Unit ID on an LCR.iQ register
- How do I put the LCR iQ meter in configuration mode?
- LCR iQ- Print a calibration ticket
Comments
Article is closed for comments.