Question:
- How to print a Blaster Printer Configuration Ticket
- How to print a Blaster Calibration Ticket
- How do I see my blaster printer settings
Environment:
- Congnitive Blaster Printer
Answer:
You can print out a configuration ticket by putting the printer in a Self Testing mode. You can simply do this by following these steps.
-
First you need to turn off the printer by using it's Power Switch
-
Then you need to hold down the Feed button through the next step
-
Turn on the printer using the Power Switch AND continue holding the Feed button down until the printer starts to print.
-
After the configuration ticket is finished printing the printer will be in what's called a Hexidecimal Dump Mode. Every time you press the feed button it will print a code. You will need to turn the printer off for a few moments and then turn it back on to resume the normal printing mode.
Cause:
- This sometimes can be used as a troubleshooting step that can help clear up printer issues.
Comments
Article is closed for comments.