Android Tablet with A Mechanical Meter and Epson TM-T88 Thermal Printer Wiring Setup

Summary:

This article provides a wiring/setup guide for connecting an Android tablet, a mechanical meter, and an Epson TM‑T88 thermal printer using either Firefly or Parani Bluetooth adapters, listing the required cables, power connections, and null‑modem adapter options. It warns that hex nuts for mounting the Bluetooth adapters aren’t supplied, is intended for Certified Truck Shops, and links to additional configuration guides for the printer and Bluetooth adapters.


Question: 

How do I wire an Android tablet with a Mechanical meter and Epson TM-T88 Thermal Printer?


Environment: 

  • New Mobile Delivery
  • Android Tablet
  • Epson TM-T88 Thermal Printer
  • Epson TM88 Thermal Printer

Answer: 

Disclaimer:

The following guide was designed to assist Certified Truck Shops. This guide might not show all of the items and Cargas might not supply everything needed for a full installation. Please consult a Certified Truck Shop.

Please select the correct tab for your corresponding Firefly or Parani bluetooth adapter.

With a Firefly Bluetooth adapter With a Parani Bluetooth adapter

Warning:

One item not shown and Cargas does not supply in this setup, is hex nuts to mount the Firefly/Parani bluetooth adapters to the serial cables. These are usually supplied by Certified Truck Shops.

Click Here for an Amazon Link

A Android Tablet F Firefly Bluetooth Adapter
B USB A to USB C Cable G Firefly Bluetooth Adapter USB Power Cable
C Epson TM-T88 Thermal Printer H Lind Power Adapter
D Epson TM-T88 Power Cable 
(to fused truck power)
I Lind Power Adapter Power Cable 
(to fused truck power)
E Null Modem DB9 Pin to DB25 Pin Female/Male 
Click Here For Amazon Link 
   

Click on the pictures to enlarge them

MechMeterTM88-Front.jpg

MechMeterTM88-Top.jpg


Additional Info:

 

Comments

0 comments

Article is closed for comments.