Dual LCR iQ Meter Configuration Guide - LCR iQ Network

Summary:

I have broken this down into three articles to make it easier to follow. These articles will help you configure two LCR-iQ registers to work with New Mobile Delivery in a dual meter configuration using the LCR.iQ Network. This setup follows the Liquid Controls Dual Meter System with Pass Through Printing and Pass Through LCP Using RS232 Device. 

Assumptions / Additional Info 

• This document assumes the user has an understanding and experience with outfitting trucks, installing/configuring registers, and electrical wiring.

Environment:

• Cargas Energy
• New Mobile Delivery
• Liquid Controls LCR.iQ register

Guide:

Typically follow these articles in order. These articles are all linked together so that you can progress through them step by step.

1. Dual LCR.iQ Network - External Wiring Diagram
   
   
2. Dual LCR.iQ Network - Internal Wiring Diagram
   
   
3. Dual LCR.iQ Network - I/O Configuration

Additional Info:

• Liquid Controls LCR iQ Printer Type Setup
• How to edit the Meter ID on an LCR.iQ register
• How to edit the Unit ID on an LCR.iQ register
• How do I put the LCR iQ meter in configuration mode?
• LCR iQ- Print a calibration ticket