Android Tablet with A Mechanical Meter and Epson TM-U295 Slip Printer Wiring Setup

Summary:

This article is a wiring/setup guide for connecting an Android tablet, a mechanical meter and an Epson TM-U295 slip printer using either a Firefly or Parani Bluetooth serial adapter, listing the required cables/adapters (USB A–C, null‑modem DB9/DB25, printer power, Lind power adapter, etc.) and showing where each connects, including fused truck power. It cautions the guide is aimed at Certified Truck Shops (some hardware like mounting hex nuts may not be provided), and includes links/steps for configuring the Firefly/Parani adapters and an explanation of null‑modem cables.


Question: 

How do I wire an Android tablet with a Mechanical meter and Epson TM-U295 Slip Printer?


Environment: 

  • New Mobile Delivery
  • Android Tablet
  • Epson TM-U295 Slip Printer

Answer: 

Disclaimer:

The following guide was designed to assist Certified Truck Shops. This guide might not show all of the items and Cargas might not supply everything needed for a full installation. Please consult a Certified Truck Shop.

Please select the correct tab for your corresponding Firefly or Parani bluetooth adapter.

With a Firefly Bluetooth adapter With a Parani Bluetooth adapter

Warning:

One item not shown and Cargas does not supply in this setup, is hex nuts to mount the Firefly/Parani bluetooth adapters to the serial cables. These are usually supplied by Certified Truck Shops.

Click Here for an Amazon Link

A Android Tablet F Firefly Bluetooth Adapter
B USB A to USB C Cable G Firefly Bluetooth Adapter USB Power Cable
C Epson TM-U295 Slip Printer H Lind Power Adapter
D Epson TM-U295 Power Cable 
(to fused truck power)
I Lind Power Adapter Power Cable 
(to fused truck power)
E Null Modem DB9 Pin to DB25 Pin Female/Male 
Click Here For Amazon Link 
   

Click on the pictures to enlarge them

mceclip0.png

mceclip1.png


Additional Info:

 

Comments

0 comments

Article is closed for comments.