1. Cargas Energy
  2. Mobile Delivery and Truck Meter Resources
  3. Truck / Meter / Printer Configuration

Android Tablet with A Mechanical Meter and Epson TM-U295 Slip Printer Wiring Setup

Avatar
Russ Casadonti
Edited:

Question: 

How do I wire an Android tablet with a Mechanical meter and Epson TM-U295 Slip Printer?

Environment: 

  • New Mobile Delivery
  • Android Tablet
  • Epson TM-U295 Slip Printer

Answer: 

Disclaimer:

The following guide was designed to assist Certified Truck Shops. This guide might not show all of the items and Cargas might not supply everything needed for a full installation. Please consult a Certified Truck Shop.

Please select the correct tab for your corresponding Firefly or Parani bluetooth adapter.

With a Firefly Bluetooth adapter With a Parani Bluetooth adapter

Warning:

One item not shown and Cargas does not supply in this setup, is hex nuts to mount the Firefly/Parani bluetooth adapters to the serial cables. These are usually supplied by Certified Truck Shops.

Click Here for an Amazon Link

A Android Tablet F Firefly Bluetooth Adapter
B USB A to USB C Cable G Firefly Bluetooth Adapter USB Power Cable
C Epson TM-U295 Slip Printer H Lind Power Adapter
D Epson TM-U295 Power Cable 
(to fused truck power)		 I Lind Power Adapter Power Cable 
(to fused truck power)
E Null Modem DB9 Pin to DB25 Pin Female/Male 
Click Here For Amazon Link  		   

Click on the pictures to enlarge them

mceclip0.png

mceclip1.png

Additional Info:

 

Comments

0 comments

Article is closed for comments.

Articles in this section

See more