Brent Swope
Activity overview
Latest activity by Brent Swope-
Brent Swope created an article, How do I know which printer is the best option in our trucks from an end user's perspective?
Summary:This article helps end users choose truck printers based on label size needs and available support resources. For larger labels and if you have a competent mechanic/IT team to configure and...
-
Brent Swope created an article, Android/Bluetooth - Unable to connect to meter, start delivery, print, or shift in/out
Summary:This article provides step-by-step troubleshooting for Android tablet-to-meter Bluetooth communication problems in Cargas Energy Mobile Delivery (e.g., timeouts, return code or printer erro...
-
Brent Swope created an article, LCR-II - Ticket prints "Multiple Deliveries at One Site"
Summary:This article explains that the LCR-II prints the "Multiple Deliveries at One Site" message whenever the no-flow timer is disabled—either by enabling the Multiple Fills option (at the tank o...
-
Brent Swope created an article, How do I perform a pump and print delivery on an LCR2?
Summary:This article describes a manual "pump-and-print" procedure for LCRII registers as an emergency workaround or troubleshooting step — note these deliveries are not recorded by the system and ...
-
Brent Swope created an article, LCR-II - Print a Calibration Ticket
Summary:This article explains how to print a calibration (diagnostic) ticket from an LCR-II register to verify the register-printer connection and capture any fault/diagnostic messages. To do so, c...
-
Brent Swope created an article, LCR-II - Clear Register of Pending Deliveries
Summary:This article explains how to clear active or pending delivery transactions on an LCR-II register to troubleshoot problems starting or shifting deliveries. The main steps are to load a blank...
-
Brent Swope created an article, How to Guide: Zebra Printer - Configuration Settings
Summary: The manufacturer default settings of a Zebra printer will need to be altered prior to using the printer in a delivery truck or with any Cargas Mobile applications. The primary settin...
-
Brent Swope created an article, Zebra Printer - Sending Configuration Commands
Summary:This article explains that Zebra printers’ factory defaults must be changed before use with delivery trucks or Cargas Mobile apps and provides the required tools and steps to do so. Downloa...
-
Brent Swope created an article, LCR-II / Zebra RW420 Wiring and Configuration
Summary:This article explains how to connect a Zebra RW420 to an LCR-II truck: you need the Zebra RW420, its vehicle dock, a 9‑to‑25 pin NULL modem cable, and the LCR‑II register set to printer typ...
-
Brent Swope created an article, LCR-II / Zebra ZQ520 Wiring and Configuration
Summary:This article details the wiring and configuration steps to connect a Zebra ZQ520 to an LCR-II truck: required hardware includes the ZQ520, vehicle dock, USB-to-serial adapter and a straight...