Russ Casadonti
Articles
-
How to print a shift ticket from a Neptune E4000 meter
Summary:This article explains how to print an end-of-shift ticket from a Neptune E4000 meter by navigating the main menu. From the main menu (press Stop/Cancel to return), use the Arrow > to select...
-
How to print a calibration ticket on a Neptune E4000 meter
Summary:This article explains how to print a calibration ticket on a Neptune E4000 register (New Mobile Delivery). From the main menu (press Stop/Cancel until there), navigate with the Arrow > and ...
-
How to get a Zebra printer to work with a Neptune E4000 meter
Summary:To get a Zebra RW420/ZQ520/ZQ521 to work with a Neptune E4000, disable the Printer Status Check setting — if that setting is absent the meter is on firmware higher than EA.01.16 and must be...
-
How to configure the printer type on a Neptune E4000 meter
Summary:This article explains how to configure the printer type on a Neptune E4000 register by entering the Supervisor setup (access from the main menu—press Stop/Cancel repeatedly—and enter the de...
-
Android tablet with an Neptune E4000 meter and Epson TM-U295 Slip Printer
Summary:This article shows the required cables and hardware to connect an Android tablet to a Neptune E4000 register and an Epson TM-U295 slip printer, listing each component (tablet, USB/serial ca...
-
Android tablet with an Neptune E4000 meter and Epson TM-T88 Thermal Printer
Summary:This article provides a parts list and wiring overview for connecting an Android tablet to a Neptune E4000 register and an Epson TM-T88 thermal printer in a mobile delivery setup, covering ...
-
Android tablet with an Neptune E4000 meter and Zebra RW420 Thermal Bluetooth Printer
Summary:This article provides a parts list and wiring/setup overview for integrating an Android tablet with a Neptune E4000 meter and a Zebra RW420 thermal Bluetooth printer in a vehicle. It lists ...
-
Android tablet with an Neptune E4000 meter and Cognitive Blaster Thermal Bluetooth Printer
Summary:This article gives a parts checklist and wiring diagram to connect an Android tablet to a Neptune E4000 meter and a Cognitive Blaster Thermal Bluetooth printer, listing every required cable...
-
Android tablet with an Neptune E4000 meter and Zebra ZQ520 Thermal Bluetooth Printer
Summary:This article provides a complete parts list and wiring guide for connecting an Android tablet to a Neptune E4000 meter and a Zebra ZQ520/ZQ521 Bluetooth thermal printer in a vehicle, showin...
-
Epson TM-88 Dip Switch Settings
Summary:This article explains that the Epson TM-88 uses physical dip switches (under a bottom service cover) to control printer and serial communication settings that must match the connected meter...