Russ Casadonti
Articles
-
Android Tablet with A Mechanical Meter and Epson TM-T88 Thermal Printer Wiring Setup
Summary:This article provides a wiring/setup guide for connecting an Android tablet, a mechanical meter, and an Epson TM‑T88 thermal printer using either Firefly or Parani Bluetooth adapters, listi...
-
Android Tablet with A Mechanical Meter and Cognitive Blaster Printer Wiring Setup - Mobile Delivery & Cylinder Exchange
Summary:This article is a wiring and setup guide for connecting an Android tablet to a Mechanical meter and a Cognitive Blaster thermal Bluetooth printer for Mobile Delivery and Cylinder Exchange, ...
-
Android Tablet with A Mechanical Meter and Zebra ZQ520/ZQ521 Printer Wiring Setup - Mobile Delivery & Cylinder Exchange
Summary:This article is a wiring/setup guide for integrating an Android tablet with a mechanical meter or for cylinder exchange using a Zebra ZQ520/ZQ521 thermal Bluetooth printer, listing required...
-
How to configure the HHC port on a Neptune E4000 meter
Summary:This article explains how to configure the HHC (handheld computer) serial port on a Neptune E4000 meter: enter the Supervisor setup (default password 2000), open COM Ports, select HHC, then...
-
How to do a pump and print on a Neptune E4000 meter
Summary:This article explains how to perform a pump-and-print on a Neptune E4000: from the main menu go to Route → Delivery, choose the product, optionally set a preset quantity, then start the del...
-
How to print a shift ticket from a Neptune E4000 meter
Summary:This article explains how to print an end-of-shift ticket from a Neptune E4000 meter by navigating the main menu. From the main menu (press Stop/Cancel to return), use the Arrow > to select...
-
How to print a calibration ticket on a Neptune E4000 meter
Summary:This article explains how to print a calibration ticket on a Neptune E4000 register (New Mobile Delivery). From the main menu (press Stop/Cancel until there), navigate with the Arrow > and ...
-
How to get a Zebra printer to work with a Neptune E4000 meter
Summary:To get a Zebra RW420/ZQ520/ZQ521 to work with a Neptune E4000, disable the Printer Status Check setting — if that setting is absent the meter is on firmware higher than EA.01.16 and must be...
-
How to configure the printer type on a Neptune E4000 meter
Summary:This article explains how to configure the printer type on a Neptune E4000 register by entering the Supervisor setup (access from the main menu—press Stop/Cancel repeatedly—and enter the de...
-
Android tablet with an Neptune E4000 meter and Epson TM-U295 Slip Printer
Summary:This article shows the required cables and hardware to connect an Android tablet to a Neptune E4000 register and an Epson TM-U295 slip printer, listing each component (tablet, USB/serial ca...